|
Ø
Core & Mould Binder Systems
+
No Bake Process
-
AlpHaset Resins (Ester
Cured Alkaline Phenolic System)
Designed
for the production of cores and moulds in iron, ductile iron, copper,
aluminum and steel castings with both new and reclaimed sand.
-
Furan and
Phenolic Resins (Acid Cured System)
Designed for the
production of cores and moulds especially in steel and iron castings with
both new and reclaimed sand.
+
Gas Cured Process
-
P.U. Cold Box
Resins (Amine Cured System)
Designed
for all ferrous and non-ferrous applications. Cold Box resins of CKE have
very good box release characteristics and excellent humidity resistance.
-
Betaset Cold Box Resins
(MF. Cured System)
Used as a binder in production of cores and moulds in Iron,
Ductile Iron, Copper, Aluminum and steel castings. Cores and moulds
prepared with Betaset Resin gain their final
strength during casting by secondary curing. So, hot tearing and veining
defects are not encountered.
-
Alkafen resins (CO2
Cured System)
For the
production of cores and moulds in every kind of metal casting. It is
recommended that alcohol based refractory coatings should be preferred as
in all CO2 gas cured resin systems. Alkafen
system has negligible mixing fume and low casting fume and odor.
·
Hot
Box Resins
For the production of cores in ferrous and non ferrous
castings. Hot Box Resins have high mechanical strength and it is possible
to produce small castings.
·
Thermoshock Resins
Recommended for the production of radiator
cores.
·
Sand
Coating Resins (Flake Novolac Resins)
Ø
Industrial Resins
For various industrial
applications
-
Refractory Brick
Binders (solid, semi-solid, liquid)
-
Felt Bonding
Resins
-
Abrasive Resins
-
Friction Resins
-
Foam Resins for
floral use
Ø
Feeder Sleeves & Exothermic Materials
Cukurova Kimya Feeder sleeves practically have a feeding capacity
of 30 – 35 % of the total feeder volume and available with breaker
core attached on sleeve. In addition to standardized dimensions, product
modification is possible according to customer requirements.
-
Insulating
Feeder Sleeves
-
Mild Exothermic
Feeder Sleeves
-
Highly
Exothermic feeder Sleeves
-
Mini Risers
-
Feeding
Compounds
-
Mouldable
Exothermic Compounds
Ø
Mould & Core Refractory Coatings
Cukurova Kimya coatings not only prevent metal penetration and
grain paste by forming an effective refractive layer between sand and
molten metal during casting but also prevent cores and moulds from
cracking and veining effects that cause fining defect and improve the
metallurgical quality of casting.
-
Zircon Based
coatings
-
Magnesite Based
coatings
-
Graphite Based
coatings
-
Olivine Based
coatings
-
Alumina-Silicate
Based coatings
Ø
Adhesives
-
Self
setting glue for the foundry industry
-
Mortar
to fill in the openings in the mold boxes
Ø
Coated Sands
Are used for shell
molding production in the foundry industry. Cores and moulds are of
excellent quality, easily applicable and have improved gas permeability.
Ø
Ceramic Fiber Insulating Materials
-
Thermocouple
Tubes and Cones
-
Insulation
Boards
|
